Description

EX80 – Arumi Extrusion for Fabric Frames

Kiato’s AF-EX80 – Arumi Extrusion is a solid single sided extrusion which is used for installation on walls rather than freestanding or hanging. A quality anodised aluminium which can fit a silicon bead edge of 13mm deep x 4mm thick into the groove of the extrusion. As the Arumi extrusion is 80mm thick it needs to be fixed to a solid surface however once installed into position will last you years. This frame is a great option if you want a deeper frame, or want to go the extra step and turn it into a lightbox.

SPECIFICATION for your AF-EX80 – Arumi Extrusion

• 80mm wide aluminium profile
• Single sided graphic
• Wall mounted only
• Up to 13mm Silicon

AF-EX80 – Arumi Extrusion recommend installation where the extrusion can be fixed to a solid wall. Once screwed into a wall and in position the frame can be used over and over again. Just swap out the fabric graphics with silicon edges, undoubtedly making it perfect for branding or specials that need to be swapped over time and time again. Or simply to give the space a facelift instead.  There is no limit to the size you can go therefore you can cover a full wall with an interchangeable graphic. For larger frames that need over 3m lengths make sure you remember to get some joiner pieces to hold your extrusion frame together thus giving a strong hold of the joins together.

Recommended GRAPHIC Material to use in your AF-EX80 – Arumi Extrusion

• Stretch Fabric
• Block out Fabric
• Backlit Fabric

Not the size your looking for? Kiato Industries have many more extrusion to choose from check them out HERE

Specifications of your hardware:

Size: 3000mm long x 80mm x 40mm – Per length

NOTE: do not forget your corner joiners or spacers if you are using the extrusion as frames etc

If you need us to cut it to specific sizes for you please email us at info@kiato.com.au